• Name :Sale Of Mills Raymond In South Africa
  • Abstract:

Introduction

Application:

Machine separator and cyclone collector

Raymond Mill is a large-scale grinding equipment which integrates crushing, grinding, classification and transportation. It is widely used in cement, electric power, metallurgy, chemical industry, non-metallic ore and other industries. It is mainly used to grind bulk, granular and powdery raw materials into required powdery materials.

Working principle of Raymond Mill

The motor drives the moving crusher mill disc to rotate through the reducer. The material falls into the center of the mill disc through the air lock feeder, and the hot air enters the mill from the air inlet. With the rotating of the mill, the material moves to the edge of the mill plate under the action of centrifugal force. When passing through the annular groove on the mill plate, it is crushed by the roller. The crushed material is brought up at the edge of the mill plate by the high-speed air flow of the air ring, and the large particles are directly dropped to the mill plate for re-grinding. Under the action of the rotating rotor, the coarse powder falls from the cone bucket to the grinding plate and is re-grinded. The qualified fine powder is discharged with the air flow. The product is collected by the dust collector. The material containing water is dried in the process of contacting with the hot air flow. By adjusting the temperature of the hot air, the material with different humidity can meet the requirements and meet the requirements. Product moisture. By adjusting the separator, the thickness and thickness of different products can be achieved.

Working principle of Raymond Mill separator

The separator of the Raymond Mill uses the eddy current effect caused by the rotating blade of the rotating disc driven by the speed regulating motor to classify the powder. The speed of blade speed is adjusted according to the size of finished flour. In order to obtain finer powder, the rotating speed of the blade is increased, so that the coarse powder falls into the grinding chamber for re-grinding due to its own gravity, and the qualified finished powder is inhaled into the cyclone collector through the blade along with the air flow.

The work of cyclone collector in Raymond Mill

Cyclone collector plays an important role in the efficiency of Raymond Mill. When the air flow with powder enters the cyclone collector, it is in the state of high speed rotation. When the air flow separates from the powder, the air flow moves toward the center of the cone with the contraction of the cone wall to the bottom of the cone, forming a rotating upward air cylinder. At this time, the powder is separated and collected. In addition, the lower end of the cyclone collector is equipped with a turning plate dividing valve, and the powder falling from the lower end of the collector is discharged through the dividing valve. Attention should be paid to the sealing of cyclone collector, otherwise the output and quality of Raymond Mill will be affected.

The above is the working mechanism and the function of each component of the powder selection system of the Raymond Mill provided by Shibang Industrial Technology Group Co., Ltd. If there are other questions, please click online customer service.