• Name :Jaw Crusher
  • Abstract:

     Operational taboos and execution points of jaw crusher

Introduction

Application:

Operational taboos and execution points of jaw crusher

Guide: In daily production, incorrect operation can cause a variety of problems, resulting in component wear and increased production costs. As a general-purpose crushing equipment, what are the operational taboos of the jaw crusher? Follow the small series to find out!

Operational contraindication

  • 1. It is forbidden to pass iron.
  • 2. It is forbidden to bring the material to start and stop.
  • 3. It is forbidden to operate the machine with super current and low voltage.
  • 4. When the machine is prohibited from abnormal noise, continue to run.
  • 5. Check and adjust the machine when the machine is prohibited from running.
  • 6. It is forbidden to feed the machine eccentrically.
  • 7. It is forbidden to enter large materials in the crushing chamber (exceeding the maximum feeding size of the manual).

Executive points

  • 1. The jaw crusher bearing must be lubricated regularly and filled with molybdenum disulfide (high temperature resistant) grease. The refueling cycle is 1 time/shift. (per shift)
  • 2. Check and tighten the V-belt. (per shift)
  • 3. Check the wear of the seesaw. (per shift)
  • 4. Check all bolts and their fasteners. (per shift)
  • 5. Check the eccentric block of the pulley and balance wheel, which must be symmetrical. (per shift)
  • 6. During the operation of the equipment, check the vibration caused by the sinking of the foundation or the deformation of the steel frame. (weekly)
  • 7. After adjusting the discharge opening or replacing the raft, the top of the bracket thrust must be loosened. (Every time you adjust or replace accessories)

Remarks: Each shift is 8 hours of machine work.